.

Use Cases for xTuple - Email Integration

.

Test Results for 3.7.0 FinalTest Results for xtConnect 3.6.1 on 3.7.2Test Results for xtConnect 3.6.1 on 3.8.0 Beta2Test Results for xtConnect 3.6.2 on 3.8.0 RCTest Results for xtConnect 3.6.2 on 3.8.0 RC2

.

Use Case#Use Case ScenariosMain/Alternate/Exception flowsCause and Effect

.

Legend:

.

MF: Main Flow-Most likely path traversed

.

AF: Alternate Flow- Alternate path traversed by the User to achieve the same Function as in the main flow

.

EF: Exception Flow- Least likely path traversed by the user but needs to be tested

.

.

1.Configuration

.

UC_EI_CFG_01User selects to install the XTConnect packageMF: User selects to install the XTConnect package and verifies that new package(XTConnect) exists in System-Design-PackagesPRE-TEST:Ensure that XTConnect package is installedPASSPASSPASSPASSPASS

.

UC_EI_CFG_02User selects to launch the Trojita Email Client from xTupleMF: User navigates to System->Preferences,Email tab and clicks 'Start Trojita Email Client'PRE-TEST:Trojita files should be copied locally to the xTuple folderPASSPASSPASSPASSPASS

.

AF: User launches the Trojita Email client from the Trojita folder by running the Trojita.exe filePASSPASSPASSPASSPASS

.

UC_EI_CFG_03User selects to configures the Trojita Email ClientMF: User opens the Settings screen, enters the Method,Port,IMAP server, Username and Password and clicks on 'Save'POST-TEST: Emails should be displayed in the corresponding foldersPASSPASSPASSPASSPASS

.

UC_EI_CFG_04User selects to start Synchronization from xTuple clientMF: User navigates to System->Preferences,Email tab and clicks 'Start Now' to enable the Synchronization processPASSPASSPASSPASSPASS

.

UC_EI_CFG_05User selects to Synchronize a folder with xTupleMF: User right clicks on a folder with Emails in the Trojita Email client and selects 'Synchronize with xTuple' option to synchronize the folder with xTuplePOST-TEST: Verify that contacts associated to the emails in the folder are automatically created in the contacts list of xTuplePASSPASSPASSPASSPASS

.

UC_EI_CFG_06User selects to re-Synchronize a folder with xTupleMF: User stops a folder from synchronizing and Synchronizes the folder again with xTuplePOST-TEST: Verify that no duplicate contacts are createdPASSPASSPASSPASS

.

UC_EI_CFG_07User enables automatic creation of contactsMF: User checks 'Automatically Create Contacts during Email Sync' option in the system configure module and syncs an Email folderPOST-TEST: Verify that contacts are automatically created for the emails syncedPASSPASSPASSPASS

.

EF: User checks 'Automatically Create Contacts during Email Sync' option in the system configure module and clicks on 'cancel' to exit without savingPASSPASSPASSPASS

.

UC_EI_CFG_08User enters pattern to exclude when creating contactsMF: User navigates to System-Setup-xTconnect, enables automatic contact creation, clicks 'New', enters exclusion pattern and savesPOST-TEST: Verify that contacts matching the exclusion pattern are not createdPASSPASSPASSPASS

.

EF1: User navigates to System-Setup-xTconnect, edits the an exclusion pattern and savesPASSPASSPASSPASS

.

EF2: User navigates to System-Setup-xTconnect, deletes the exclusion pattern and savesPASSPASSPASSPASS

.

.

2. Viewing mail from xTuple

.

UC_EI_VMX_01User selects to view the mails associated with a contactMF: User navigates to CRM->Contacts->List, Opens a contact in edit mode,navigates to the 'Email' tab and views the Emails associated with the contactPASSPASSPASSPASSPASS

.

EF1:User opens a contact in edit mode, navigates to the 'Email tab and clicks 'New' to compose a new email to the contactPOST-TEST: Verify that contact's address should be populated in the To: fieldPASSPASSPASSPASSPASS

.

EF2:User opens a contact in edit mode, navigates to the 'Email tab,selects an email displayed and clicks 'Print' to print the EmailPOST-TEST: Verify that emails in the CC list are also printedhttp://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556PASSPASS

.

EF3:User opens a contact in edit mode, navigates to the 'Email' tab,selects an email displayed and clicks 'Reply' to compose a Reply to the emailPOST-TEST: Verify that From address on the selected message should be populated in the 'To' fieldPASSPASSPASSPASSPASS

.

EF4:User opens a contact in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Reply all' to compose a reply to the emailPOST-TEST: Same as Reply except all addresses in the CC should be copied to the new message PASSPASSPASSPASSPASS

.

EF5:User opens a contact in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Forward' PASSPASSPASSPASSPASS

.

EF6:User opens a contact in edit mode, navigates to the 'Email' tab, selects 'Attach' to attach an Email to the contactPOST-TEST: Verify that all emails associated to the contact are displayed in 'Attach Email' screenPASSPASSPASSPASSPASS

.

EF7:User opens a contact in edit mode, navigates to the 'Email' tab, selects 'Detach' to Detach an Email from the contactPASSPASSPASSPASSPASS

.

EF8:User changes the 'Limit to' field value and clicks on 'Query'POST-TEST: Verify that just the entered no. of msgs are displayedPASSPASSPASSPASSPASS

.

EF9:User selects 'Load all' checkbox and clicks on 'Query' to view all the associated emailsPASSPASSPASSPASSPASS

.

EF10:User double clicks on the Email to view the EmailPASSPASSPASSPASSPASS

.

UC_EI_VMX_02User selects to add a contact to a CRM accountAF: User navigates to CRM->Accounts->New,to create a new Account, Enters the Account Number,Account Name,Owner, adds a contact with Emails associated with it and savesPOST-TEST: Verify that all the emails associated with the contacts should be associated with the CRM accountPASSPASSPASSPASSPASS

.

EF: User navigates to CRM->Accounts->New, to create a new Account, Enters the Account Number,Account Name,Owner, adds multiple contacts to the account and clicks on 'Save'POST-TEST: Verify that emails associated with the multiple contacts should be displayed in the Email tabPASSPASSPASSPASSPASS

.

UC_EI_VMX_03User selects to attach an email to a new CRM AccountMF: User navigates to CRM->Accounts->New, Enters the Account Number, Account Name, Owner, adds a contact, navigates to the Email tab, selects 'Attach' to attach an email to the AccountPOST-TEST: Verify that "Cannot Attach Email" dialog is displayedPASSPASSPASSPASSPASS

.

AF: User navigates to CRM->Accounts->New, Enters the Account Number, Account Name, Owner, adds a contact, navigates to the Email tab, selects 'New' to compose a new emailPOST-TEST: Verify that "Cannot Compose New Email" dialog is displayedPASSPASSPASSPASSPASS

.

UC_EI_VMX_04User selects to view the emails associated with a CRM accountMF: User navigates to CRM->Accounts->List, Opens an Account in edit mode,navigates to the 'Email' tab and views the Emails associated with the accountPASSPASSPASSPASSPASS

.

EF1:User opens an Account in edit mode, navigates to the 'Email tab and clicks 'New' to compose a new email to the contactPOST-TEST: Verify that account's address should be populated in the To: fieldPASSPASSPASSPASSPASS

.

EF2:User opens an account in edit mode, navigates to the 'Email tab,selects an email displayed and clicks 'Print' to print the Emailhttp://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556PASSPASS

.

EF3:User opens an account in edit mode, navigates to the 'Email' tab,selects an email displayed and clicks 'Reply' to compose a Reply to the emailPOST-TEST: Verify that From address on the selected message should be populated in the 'To' fieldPASSPASSPASSPASSPASS

.

EF4:User opens an account in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Reply all' to compose a reply to the emailPOST-TEST: Same as Reply except all addresses in the CC should be copied to the new message PASSPASSPASSPASSPASS

.

EF5:User opens an account in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Forward' PASSPASSPASSPASSPASS

.

EF6:User opens an account in edit mode, navigates to the 'Email' tab, selects 'Attach' to attach an Email to the accountPASSPASSPASSPASSPASS

.

EF7:User opens an account in edit mode, navigates to the 'Email' tab, selects 'Detach' to Detach an Email from the AccountPASSPASSPASSPASSPASS

.

EF8:User changes the 'Limit to' field value and clicks on 'Query'POST-TEST: Verify that just the entered no. of msgs are displayedPASSPASSPASSPASSPASS

.

EF9:User selects 'Load all' checkbox and clicks on 'Query' to view all the associated emailsPASSPASSPASSPASSPASS

.

EF10:User double clicks on the Email to view the EmailPASSPASSPASSPASSPASS

.

UC_EI_VMX_05User selects to add a contact to a CustomerAF: User navigates to Sales->Customer->New,to create a new Customer, Enters the Customer Number,Name,adds a contact with Emails associated with it and savesPOST-TEST: Verify that all the emails associated with the contacts should be associated with the CustomerPASSPASSPASSPASSPASS

.

EF: User navigates to New,to create a new Customer, Enters the Customer Number,Name, adds multiple contacts to the account and clicks on 'Save'POST-TEST: Verify that emails associated with the multiple contacts should be displayed in the Email tabPASSPASSPASSPASSPASS

.

UC_EI_VMX_06User selects to view the mails associated with a CustomerMF: User navigates to Sales->Customer->List,Query, Opens a Customer in edit mode,navigates to the 'Email' tab and views the Emails associated with the CustomerPASSPASSPASSPASSPASS

.

EF1:User opens a Customer in edit mode, navigates to the 'Email tab and clicks 'New' to compose a new email to the CustomerPOST-TEST: Verify that account's address should be populated in the To: fieldPASSPASSPASSPASSPASS

.

EF2:User opens a Customer in edit mode, navigates to the 'Email tab,selects an email displayed and clicks 'Print' to print the Emailhttp://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556PASSPASS

.

EF3:User opens a Customer in edit mode, navigates to the 'Email' tab,selects an email displayed and clicks 'Reply' to compose a Reply to the emailPOST-TEST: Verify that From address on the selected message should be populated in the 'To' fieldPASSPASSPASSPASSPASS

.

EF4:User opens a Customer in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Reply all' to compose a reply to the emailPOST-TEST: Same as Reply except all addresses in the CC should be copied to the new message PASSPASSPASSPASSPASS

.

EF5:User opens a Customer in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Forward' PASSPASSPASSPASSPASS

.

EF6:User opens a Customer in edit mode, navigates to the 'Email' tab, selects 'Attach' to attach an Email to the CustomerPASShttp://www.xtuple.org/xtincident/view/bugs/15112PASSPASSPASS

.

EF7:User opens a Customer in edit mode, navigates to the 'Email' tab, selects 'Detach' to Detach an Email from the CustomerPASSPASSPASSPASSPASS

.

EF8:User changes the 'Limit to' field value and clicks on 'Query'POST-TEST: Verify that just the entered no. of msgs are displayedPASSPASSPASSPASSPASS

.

EF9:User selects 'Load all' checkbox and clicks on 'Query' to view all the associated emailsPASSPASSPASSPASSPASS

.

EF10:User double clicks on the Email to view the EmailPASSPASSPASSPASSPASS

.

UC_EI_VMX_07User selects to add a contact to a VendorAF: User navigates to Purchase->Vendor->New,to create a new Vendor, Enters the Vendor Number,Name,adds a contact with Emails associated with it and savesPOST-TEST: Verify that all the emails associated with the contacts should be associated with the VendorPASSPASSPASSPASSPASS

.

EF: User navigates to Purchase->Vendor->New,to create a new Vendor, Enters the Vendor Number,Name, adds multiple contacts to the account and clicks on 'Save'POST-TEST: Verify that emails associated with the multiple contacts should be displayed in the Email tabPASSPASSPASSPASSPASS

.

UC_EI_VMX_08User selects to attach an email to a new VendorMF: User navigates to Purchase->Vendor->New,to create a new Vendor, Enters the Vendor Number,Name,adds a contact, navigates to the Email tab, selects 'Attach' to attach an email to the AccountPOST-TEST: Verify that "Cannot Attach Email" dialog is displayedPASSPASSPASSPASSPASS

.

AF: User navigates to Purchase->Vendor->New,to create a new Vendor, Enters the Vendor Number,Name,adds a contact, navigates to the Email tab, selects 'New' to compose a new emailPOST-TEST: Verify that "Cannot Compose New Email" dialog is displayedPASSPASSPASSPASSPASS

.

UC_EI_VMX_09User selects to view the mails associated with a VendorMF: User navigates to Purchase->Vendor->List,Query, Opens a Vendor in edit mode,navigates to the 'Email' tab and views the Emails associated with the VendorPASSPASSPASSPASSPASS

.

EF1:User opens a Vendor in edit mode, navigates to the 'Email tab and clicks 'New' to compose a new email to the VendorPOST-TEST: Verify that account's address should be populated in the To: fieldPASSPASSPASSPASSPASS

.

EF2:User opens a Vendor in edit mode, navigates to the 'Email tab,selects an email displayed and clicks 'Print' to print the Emailhttp://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556PASSPASS

.

EF3:User opens a Vendor in edit mode, navigates to the 'Email' tab,selects an email displayed and clicks 'Reply' to compose a Reply to the emailPOST-TEST: Verify that From address on the selected message should be populated in the 'To' fieldPASSPASSPASSPASSPASS

.

EF4:User opens a Vendor in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Reply all' to compose a reply to the emailPOST-TEST: Same as Reply except all addresses in the CC should be copied to the new message PASSPASSPASSPASSPASS

.

EF5:User opens a Vendor in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Forward' PASSPASSPASSPASSPASS

.

EF6:User opens a Vendor in edit mode, navigates to the 'Email' tab, selects 'Attach' to attach an Email to the VendorPASSPASSPASSPASSPASS

.

EF7:User opens a Vendor in edit mode, navigates to the 'Email' tab, selects 'Detach' to Detach an Email from the VendorPASSPASSPASSPASSPASS

.

EF8:User changes the 'Limit to' field value and clicks on 'Query'POST-TEST: Verify that just the entered no. of msgs are displayedPASSPASSPASSPASSPASS

.

EF9:User selects 'Load all' checkbox and clicks on 'Query' to view all the associated emailsPASSPASSPASSPASSPASS

.

EF10:User double clicks on the Email to view the EmailPASSPASSPASSPASSPASS

.

UC_EI_VMX_10User selects to create a new EmployeeMF: User navigates to System->Employees->New, enters Employee,Employee Number, selects a Contact with email associated with it and savesPOST-TEST: Verify that Emails associated with the contacts are displayed in Employee email tabPASSPASSPASSPASSPASS

.

UC_EI_VMX_11User selects to attach an email to a new EmployeeMF: User navigates to System->Employees->New, enters Employee,Employee Number, selects a Contact, navigates to the Email tab, selects 'Attach' to attach an email to the AccountPOST-TEST: Verify that "Cannot Attach Email" dialog is displayedPASSPASSPASSPASSPASS

.

AF: User navigates to System->Employees->New, enters Employee,Employee Number, selects a Contact, navigates to the Email tab, selects 'New' to compose a new emailPOST-TEST: Verify that "Cannot Compose New Email" dialog is displayedPASSPASSPASSPASSPASS

.

UC_EI_VMX_12User selects to view the mails associated with an EmployeeMF: User navigates to System->Employees->List, Opens an Employee in edit mode,navigates to the 'Email' tab and views the Emails associated with the EmployeePASSPASSPASSPASSPASS

.

EF1:User opens an Employee in edit mode, navigates to the 'Email tab and clicks 'New' to compose a new email to the EmployeePOST-TEST: Verify that account's address should be populated in the To: fieldPASSPASSPASSPASSPASS

.

EF2:User opens an Employee in edit mode, navigates to the 'Email tab,selects an email displayed and clicks 'Print' to print the Emailhttp://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556PASSPASS

.

EF3:User opens an Employee in edit mode, navigates to the 'Email' tab,selects an email displayed and clicks 'Reply' to compose a Reply to the emailPOST-TEST: Verify that From address on the selected message should be populated in the 'To' fieldPASSPASSPASSPASSPASS

.

EF4:User opens an Employee in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Reply all' to compose a reply to the emailPOST-TEST: Same as Reply except all addresses in the CC should be copied to the new message PASSPASSPASSPASSPASS

.

EF5:User opens an Employee in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Forward' PASSPASSPASSPASSPASS

.

EF6:User opens an Employee in edit mode, navigates to the 'Email' tab, selects 'Attach' to attach an Email to the EmployeePASSPASSPASSPASSPASS

.

EF7:User opens an Employee in edit mode, navigates to the 'Email' tab, selects 'Detach' to Detach an Email from the EmployeePASSPASSPASSPASSPASS

.

EF8:User changes the 'Limit to' field value and clicks on 'Query'POST-TEST: Verify that just the entered no. of msgs are displayedPASSPASSPASSPASSPASS

.

EF9:User selects 'Load all' checkbox and clicks on 'Query' to view all the associated emailsPASSPASSPASSPASSPASS

.

EF10:User double clicks on the Email to view the EmailPASSPASSPASSPASSPASS

.

EF11:User navigates to System->Employees->List, Opens an Employee in edit mode,changes with the Contact associated with the employee and SavesPOST-TEST: Verify that the Email tab is updated PASSPASSPASSPASSPASS

.

UC_EI_VMX_13User selects to attach an email to a new OppurtunityMF: User navigates to CRM-> Opportunity->New, enters Opportunity Name,Name,CRM Account,Contact, navigates to the Email tab, selects 'Attach' to attach an email to the AccountPOST-TEST: Verify that "Cannot Attach Email" dialog is displayedPASSPASSPASSPASSPASS

.

AF: User navigates to CRM-> Opportunity->New, enters Opportunity Name,Name,CRM Account,Contact, navigates to the Email tab, selects 'New' to compose a new emailPOST-TEST: Verify that "Cannot Compose New Email" dialog is displayedPASSPASSPASSPASSPASS

.

UC_EI_VMX_14User selects to view the mails associated with an OppurtunityMF: User navigates to CRM-> Opportunity->List, Opens an Opportunity in edit mode,navigates to the 'Email' tab and views the Emails associated with the OpportunityPASSPASSPASSPASSPASS

.

EF1:User opens an Opportunity in edit mode, navigates to the 'Email tab and clicks 'New' to compose a new emailPOST-TEST: Verify that account's address should be populated in the To: fieldPASSPASSPASSPASSPASS

.

EF2:User opens an Oppurtunity in edit mode, navigates to the 'Email tab,selects an email displayed and clicks 'Print' to print the Emailhttp://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556PASSPASS

.

EF3:User opens an Oppurtunity in edit mode, navigates to the 'Email' tab,selects an email displayed and clicks 'Reply' to compose a Reply to the emailPOST-TEST: Verify that From address on the selected message should be populated in the 'To' fieldPASSPASSPASSPASSPASS

.

EF4:User opens a Opportunity in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Reply all' to compose a reply to the emailPOST-TEST: Same as Reply except all addresses in the CC should be copied to the new message PASSPASSPASSPASSPASS

.

EF5:User opens a Opportunity in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Forward' PASSPASSPASSPASSPASS

.

EF6:User opens a Opportunity in edit mode, navigates to the 'Email' tab, selects 'Attach' to attach an Email to the OpportunityPASSPASSPASSPASSPASS

.

EF7:User opens a Opportunity in edit mode, navigates to the 'Email' tab, selects 'Detach' to Detach an Email from the OpportunityPASSPASSPASSPASSPASS

.

EF8:User changes the 'Limit to' field value and clicks on 'Query'POST-TEST: Verify that just the entered no. of msgs are displayedPASSPASSPASSPASSPASS

.

EF9:User selects 'Load all' checkbox and clicks on 'Query' to view all the associated emailsPASSPASSPASSPASSPASS

.

EF10:User double clicks on the Email to view the EmailPASSPASSPASSPASSPASS

.

UC_EI_VMX_15User selects to attach an email to a new ProjectMF: User navigates to CRM-> Project->New, enters Number,Name,Description,Status, navigates to the Email tab, selects 'Attach' to attach an email to the AccountPOST-TEST: Verify that "Cannot Attach Email" dialog is displayedPASSPASSPASSPASSPASS

.

AF: User navigates to CRM-> Project->New, enters Number,Name,Description,Status, navigates to the Email tab, selects 'New' to compose a new emailPOST-TEST: Verify that "Cannot Compose New Email" dialog is displayedPASSPASSPASSPASSPASS

.

UC_EI_VMX_16User selects to view the mails associated with a ProjectMF: User navigates to CRM-> Project->List, Opens a Project in edit mode,navigates to the 'Email' tab and views the Emails associated with the ProjectPASSPASSPASSPASSPASS

.

EF1:User opens a Project in edit mode, navigates to the 'Email tab and clicks 'New' to compose a new emailPOST-TEST: Verify that account's address should be populated in the To: fieldPASSPASSPASSPASSPASS

.

EF2:User opens a Project in edit mode, navigates to the 'Email tab,selects an email displayed and clicks 'Print' to print the Emailhttp://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556PASSPASS

.

EF3:User opens a Project in edit mode, navigates to the 'Email' tab,selects an email displayed and clicks 'Reply' to compose a Reply to the emailPOST-TEST: Verify that From address on the selected message should be populated in the 'To' fieldPASSPASSPASSPASSPASS

.

EF4:User opens a Project in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Reply all' to compose a reply to the emailPOST-TEST: Same as Reply except all addresses in the CC should be copied to the new message PASSPASSPASSPASSPASS

.

EF5:User opens a Project in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Forward' PASSPASSPASSPASSPASS

.

EF6:User opens a Project in edit mode, navigates to the 'Email' tab, selects 'Attach' to attach an Email to the ProjectPASSPASSPASSPASSPASS

.

EF7:User opens a Project in edit mode, navigates to the 'Email' tab, selects 'Detach' to Detach an Email from the ProjectPASSPASSPASSPASSPASS

.

EF8:User changes the 'Limit to' field value and clicks on 'Query'POST-TEST: Verify that just the entered no. of msgs are displayedPASSPASSPASSPASSPASS

.

EF9:User selects 'Load all' checkbox and clicks on 'Query' to view all the associated emailsPASSPASSPASSPASSPASS

.

EF10:User double clicks on the Email to view the EmailPASSPASSPASSPASSPASS

.

UC_EI_VMX_17User selects to Attach an email to a New QuoteMF: User navigates to Sales->Quote->New, selects a Customer,adds a line item, navigates to the Email tab, selects 'Attach' to attach a new email to the QuotePOST-TEST: Verify that "Cannot Attach Email" dialog is displayedPASSPASSPASSPASSPASS

.

AF: User navigates to Sales>Quote->New, selects a Customer,adds a line item, navigates to the Email tab, selects 'New' to compose a new emailPOST-TEST: Verify that "Cannot Compose New Email" dialog is displayedPASSPASSPASSPASSPASS

.

UC_EI_VMX_18User selects to view the mails associated with a QuoteMF: User navigates to Sales->Quote->List, Opens a Quote in edit mode,navigates to the 'Email' tab and views the Emails associated with the QuotePASSPASSPASSPASSPASS

.

EF1:User opens a Quote in edit mode, navigates to the 'Email tab and clicks 'New' to compose a new emailPOST-TEST: Verify that account's address should be populated in the To: fieldPASSPASSPASSPASSPASS

.

EF2:User opens a Quote in edit mode, navigates to the 'Email tab,selects an email displayed and clicks 'Print' to print the Emailhttp://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556PASSPASS

.

EF3:User opens a Quote in edit mode, navigates to the 'Email' tab,selects an email displayed and clicks 'Reply' to compose a Reply to the emailPOST-TEST: Verify that From address on the selected message should be populated in the 'To' fieldPASSPASSPASSPASSPASS

.

EF4:User opens a Quote in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Reply all' to compose a reply to the emailPOST-TEST: Same as Reply except all addresses in the CC should be copied to the new message PASSPASSPASSPASSPASS

.

EF5:User opens a Quote in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Forward' PASSPASSPASSPASSPASS

.

EF6:User opens a Quote in edit mode, navigates to the 'Email' tab, selects 'Attach' to attach an Email to the QuotePASSPASSPASSPASSPASS

.

EF7:User opens a Quote in edit mode, navigates to the 'Email' tab, selects 'Detach' to Detach an Email from the QuotePASSPASSPASSPASSPASS

.

EF8:User changes the 'Limit to' field value and clicks on 'Query'POST-TEST: Verify that just the entered no. of msgs are displayedPASSPASSPASSPASSPASS

.

EF9:User selects 'Load all' checkbox and clicks on 'Query' to view all the associated emailsPASSPASSPASSPASSPASS

.

EF10:User double clicks on the Email to view the EmailPASSPASSPASSPASSPASS

.

UC_EI_VMX_19User selects to Attach an email to a New Sales OrderMF: User navigates to Sales->Sales Order->New, selects a Customer,adds a line item, navigates to the Email tab, selects 'Attach' to attach a new email to the Sales OrderPOST-TEST: Verify that "Cannot Attach Email" dialog is displayedPASSPASSPASSPASSPASS

.

AF: User navigates to Sales->Sales Order->New, selects a Customer,adds a line item, navigates to the Email tab, selects 'New' to compose a new emailPOST-TEST: Verify that "Cannot Compose New Email" dialog is displayedPASSPASSPASSPASSPASS

.

UC_EI_VMX_20User selects to view the mails associated with a Sales OrderMF: User navigates to Sales->Sales Order->List, Opens a Sales Order in edit mode,navigates to the 'Email' tab and views the Emails associated with the Sales OrderPASSPASSPASSPASSPASS

.

EF1:User opens a Sales Order in edit mode, navigates to the 'Email tab and clicks 'New' to compose a new emailPOST-TEST: Verify that account's address should be populated in the To: fieldPASSPASSPASSPASSPASS

.

EF2:User opens a Sales Order in edit mode, navigates to the 'Email tab,selects an email displayed and clicks 'Print' to print the Emailhttp://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556PASSPASS

.

EF3:User opens a Sales Order in edit mode, navigates to the 'Email' tab,selects an email displayed and clicks 'Reply' to compose a Reply to the emailPOST-TEST: Verify that From address on the selected message should be populated in the 'To' fieldPASSPASSPASSPASSPASS

.

EF4:User opens a Sales Ordere in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Reply all' to compose a reply to the emailPOST-TEST: Same as Reply except all addresses in the CC should be copied to the new message PASSPASSPASSPASSPASS

.

EF5:User opens a Sales Order in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Forward' PASSPASSPASSPASSPASS

.

EF6:User opens a Sales Order in edit mode, navigates to the 'Email' tab, selects 'Attach' to attach an Email to the Sales OrderPASSPASSPASSPASSPASS

.

EF7:User opens a Sales Order in edit mode, navigates to the 'Email' tab, selects 'Detach' to Detach an Email from the Sales OrderPASSPASSPASSPASSPASS

.

EF8:User changes the 'Limit to' field value and clicks on 'Query'POST-TEST: Verify that just the entered no. of msgs are displayedPASSPASSPASSPASSPASS

.

EF9:User selects 'Load all' checkbox and clicks on 'Query' to view all the associated emailsPASSPASSPASSPASSPASS

.

EF10:User double clicks on the Email to view the EmailPASSPASSPASSPASSPASS

.

UC_EI_VMX_21User selects to Attach an email to a New Transfer OrderMF: User navigates to Inventory->Transfer Order->New, Selects the From,To sites,adds a line item, navigates to the Email tab, selects 'Attach' to attach a new email to the Transfer OrderPOST-TEST: Verify that "Cannot Attach Email" dialog is displayedPASSPASSPASSPASSPASS

.

AF: User navigates to Inventory->Transfer Order->New, Selects the From,To sites,adds a line item, navigates to the Email tab, selects 'New' to compose a new emailPOST-TEST: Verify that "Cannot Compose New Email" dialog is displayedPASSPASSPASSPASSPASS

.

UC_EI_VMX_22User selects to view the mails associated with a Transfer OrderMF: User navigates to Inventory->Transfer Order->List Open, Opens a Transfer Order in edit mode,navigates to the 'Email' tab and views the Emails associated with the Transfer OrderPASSPASSPASSPASSPASS

.

EF1:User opens a Transfer Order in edit mode, navigates to the 'Email tab and clicks 'New' to compose a new emailPOST-TEST: Verify that account's address should be populated in the To: fieldPASSPASSPASSPASSPASS

.

EF2:User opens a Transfer Order in edit mode, navigates to the 'Email tab,selects an email displayed and clicks 'Print' to print the Emailhttp://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556PASSPASS

.

EF3:User opens a Transfer Order in edit mode, navigates to the 'Email' tab,selects an email displayed and clicks 'Reply' to compose a Reply to the emailPOST-TEST: Verify that From address on the selected message should be populated in the 'To' fieldPASSPASSPASSPASSPASS

.

EF4:User opens a Transfer Order in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Reply all' to compose a reply to the emailPOST-TEST: Same as Reply except all addresses in the CC should be copied to the new message PASSPASSPASSPASSPASS

.

EF5:User opens a Transfer Order in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Forward' PASSPASSPASSPASSPASS

.

EF6:User opens a Transfer Order in edit mode, navigates to the 'Email' tab, selects 'Attach' to attach an Email to the Transfer OrderPASSPASSPASSPASSPASS

.

EF7:User opens a Transfer Order in edit mode, navigates to the 'Email' tab, selects 'Detach' to Detach an Email from the Transfer OrderPASSPASSPASSPASSPASS

.

EF8:User changes the 'Limit to' field value and clicks on 'Query'POST-TEST: Verify that just the entered no. of msgs are displayedPASSPASSPASSPASSPASS

.

EF9:User selects 'Load all' checkbox and clicks on 'Query' to view all the associated emailsPASSPASSPASSPASSPASS

.

EF10:User double clicks on the Email to view the EmailPASSPASSPASSPASSPASS

.

UC_EI_VMX_23User selects to Attach an email to a New Purchase OrderMF: User navigates to Purchase->Purchase Order->New, Selects a Vendor,adds a line item, navigates to the Email tab, selects 'Attach' to attach a new email to the Purchase OrderPOST-TEST: Verify that "Cannot Attach Email" dialog is displayedPASSPASSPASSPASSPASS

.

AF: User navigates to Purchase->Purchase Order->New, Selects the Vendor,adds a line item, navigates to the Email tab, selects 'New' to compose a new emailPOST-TEST: Verify that "Cannot Compose New Email" dialog is displayedPASSPASSPASSPASSPASS

.

UC_EI_VMX_24User selects to view the mails associated with a Purchase OrderMF: User navigates to Purchase->Purchase Order->List Open, Opens a Purchase Order in edit mode,navigates to the 'Email' tab and views the Emails associated with the Purchase OrderPASSPASSPASSPASSPASS

.

EF1:User opens a Purchase Order in edit mode, navigates to the 'Email tab and clicks 'New' to compose a new emailPOST-TEST: Verify that account's address should be populated in the To: fieldPASSPASSPASSPASSPASS

.

EF2:User opens a Purchase Order in edit mode, navigates to the 'Email tab,selects an email displayed and clicks 'Print' to print the Emailhttp://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556PASSPASS

.

EF3:User opens a Purchase Order in edit mode, navigates to the 'Email' tab,selects an email displayed and clicks 'Reply' to compose a Reply to the emailPOST-TEST: Verify that From address on the selected message should be populated in the 'To' fieldPASSPASSPASSPASSPASS

.

EF4:User opens a Purchase Order in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Reply all' to compose a reply to the emailPOST-TEST: Same as Reply except all addresses in the CC should be copied to the new message PASSPASSPASSPASSPASS

.

EF5:User opens a Purchase Order in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Forward' PASSPASSPASSPASSPASS

.

EF6:User opens a Purchase Order in edit mode, navigates to the 'Email' tab, selects 'Attach' to attach an Email to the Purchase OrderPASSPASSPASSPASSPASS

.

EF7:User opens a Purchase Order in edit mode, navigates to the 'Email' tab, selects 'Detach' to Detach an Email from the Purchase OrderPASSPASSPASSPASSPASS

.

EF8:User changes the 'Limit to' field value and clicks on 'Query'POST-TEST: Verify that just the entered no. of msgs are displayedPASSPASSPASSPASSPASS

.

EF9:User selects 'Load all' checkbox and clicks on 'Query' to view all the associated emailsPASSPASSPASSPASSPASS

.

EF10:User double clicks on the Email to view the EmailPASSPASSPASSPASSPASS

.

UC_EI_VMX_25User selects to Attach an email to a New Return AuthorizationMF: User navigates to Sales->Return->New, Selects a Customer,adds a Return Authorization item, navigates to the Email tab, selects 'Attach' to attach a new email to the RAPOST-TEST: Verify that "Cannot Attach Email" dialog is displayedPASSPASSPASSPASSPASS

.

AF: User navigates to Sales->Return->New, Selects a Customer,adds a Return Authorization item, navigates to the Email tab, selects 'New' to compose a new emailPOST-TEST: Verify that "Cannot Compose New Email" dialog is displayedPASSPASSPASSPASSPASS

.

UC_EI_VMX_26User selects to view the mails associated with a Return AuthorizationMF: User navigates to Sales->Return->List Open, Opens a Return Authorization in edit mode,navigates to the 'Email' tab and views the Emails associated with the Return AuthorizationPASSPASSPASSPASSPASS

.

EF1:User opens a Return Authorization in edit mode, navigates to the 'Email tab and clicks 'New' to compose a new emailPOST-TEST: Verify that account's address should be populated in the To: fieldPASSPASSPASSPASSPASS

.

EF2:User opens a Return Authorization in edit mode, navigates to the 'Email tab,selects an email displayed and clicks 'Print' to print the Emailhttp://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556PASSPASS

.

EF3:User opens a Return Authorization in edit mode, navigates to the 'Email' tab,selects an email displayed and clicks 'Reply' to compose a Reply to the emailPOST-TEST: Verify that From address on the selected message should be populated in the 'To' fieldPASSPASSPASSPASSPASS

.

EF4:User opens a Return Authorization in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Reply all' to compose a reply to the emailPOST-TEST: Same as Reply except all addresses in the CC should be copied to the new message PASSPASSPASSPASSPASS

.

EF5:User opens a Return Authorization in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Forward' PASSPASSPASSPASSPASS

.

EF6:User opens a Return Authorization in edit mode, navigates to the 'Email' tab, selects 'Attach' to attach an Email to the Return AuthorizationPASSPASSPASSPASSPASS

.

EF7:User opens a Return Authorization in edit mode, navigates to the 'Email' tab, selects 'Detach' to Detach an Email from the Return AuthorizationPASSPASSPASSPASSPASS

.

EF8:User changes the 'Limit to' field value and clicks on 'Query'POST-TEST: Verify that just the entered no. of msgs are displayedPASSPASSPASSPASSPASS

.

EF9:User selects 'Load all' checkbox and clicks on 'Query' to view all the associated emailsPASSPASSPASSPASSPASS

.

EF10:User double clicks on the Email to view the EmailPASSPASSPASSPASSPASS

.

UC_EI_VMX_27User selects to Attach an email to a New To Do List ItemMF: User navigates to CRM->To Do->New, Enters Task Name,Description,status details,assigns a contact and navigates to the 'Email tab, selects 'Attach' to attach an email to the itemPOST-TEST: Verify that "Cannot Attach Email" dialog is displayedPASSPASSPASSPASSPASS

.

AF: User navigates to CRM->To Do->New, Enters Task Name,Description,status details,assigns a contact and navigates to the 'Email tab, selects 'New' to compose a new emailPOST-TEST: Verify that "Cannot Compose New Email" dialog is displayedPASSPASSPASSPASSPASS

.

UC_EI_VMX_28User selects to view the mails associated with a To Do List ItemMF: User navigates to CRM->To Do->List, Opens a To Do List Item in edit mode,navigates to the 'Email' tab and views the Emails associated with the To Do List ItemPASShttp://www.xtuple.org/xtincident/view/bugs/15124PASSPASSPASS

.

EF1:User opens a To Do List Item in edit mode, navigates to the 'Email tab and clicks 'New' to compose a new emailPOST-TEST: Verify that account's address should be populated in the To: fieldPASSPASSPASSPASSPASS

.

EF2:User opens a To Do List Item in edit mode, navigates to the 'Email tab,selects an email displayed and clicks 'Print' to print the Emailhttp://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556PASSPASS

.

EF3:User opens a To Do List Item in edit mode, navigates to the 'Email' tab,selects an email displayed and clicks 'Reply' to compose a Reply to the emailPOST-TEST: Verify that From address on the selected message should be populated in the 'To' fieldPASSPASSPASSPASSPASS

.

EF4:User opens a To Do List Item in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Reply all' to compose a reply to the emailPOST-TEST: Same as Reply except all addresses in the CC should be copied to the new message PASSPASSPASSPASSPASS

.

EF5:User opens a To Do List Item in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Forward' PASSPASSPASSPASSPASS

.

EF6:User opens a To Do List Item in edit mode, navigates to the 'Email' tab, selects 'Attach' to attach an Email to the To Do List ItemPASSPASSPASSPASSPASS

.

EF7:User opens a To Do List Item in edit mode, navigates to the 'Email' tab, selects 'Detach' to Detach an Email from the To Do List ItemPASSPASSPASSPASSPASS

.

EF8:User changes the 'Limit to' field value and clicks on 'Query'POST-TEST: Verify that just the entered no. of msgs are displayedPASSPASSPASSPASSPASS

.

EF9:User selects 'Load all' checkbox and clicks on 'Query' to view all the associated emailsPASSPASSPASSPASSPASS

.

EF10:User double clicks on the Email to view the EmailPASSPASSPASSPASSPASS

.

UC_EI_VMX_29User selects to Attach an email to a New IncidentMF: User navigates to CRM->Incident->New, selects a category, enters description and navigates to the 'Email tab, selects 'Attach' to attach an email to the IncidentPOST-TEST: Verify that "Cannot Attach Email" dialog is displayedPASSPASSPASSPASSPASS

.

AF: User navigates to CRM->Incident->New, selects a category, enters description and navigates to the 'Email tab, selects 'New' to compose a new emailPOST-TEST: Verify that "Cannot Compose New Email" dialog is displayedPASSPASSPASSPASSPASS

.

UC_EI_VMX_30User selects to view the mails associated with an Incident ItemMF: User navigates to CRM->Incident->List, Opens an Incident in edit mode,navigates to the 'Email' tab and views the Emails associated with the IncidentPASSPASSPASSPASSPASS

.

EF1:User opens an Incident in edit mode, navigates to the 'Email tab and clicks 'New' to compose a new emailPOST-TEST: Verify that account's address should be populated in the To: fieldPASSPASSPASSPASSPASS

.

EF2:User opens an Incident in edit mode, navigates to the 'Email tab,selects an email displayed and clicks 'Print' to print the Emailhttp://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556http://www.xtuple.org/xtincident/view/bugs/14556PASSPASS

.

EF3:User opens an Incident Item in edit mode, navigates to the 'Email' tab,selects an email displayed and clicks 'Reply' to compose a Reply to the emailPOST-TEST: Verify that From address on the selected message should be populated in the 'To' fieldPASSPASSPASSPASSPASS

.

EF4:User opens an Incident in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Reply all' to compose a reply to the emailPOST-TEST: Same as Reply except all addresses in the CC should be copied to the new message PASSPASSPASSPASSPASS

.

EF5:User opens an Incident in edit mode, navigates to the 'Email' tab, selects an email displayed and clicks 'Forward' PASSPASSPASSPASSPASS

.

EF6:User opens an Incident in edit mode, navigates to the 'Email' tab, selects 'Attach' to attach an Email to the IncidentPASSPASSPASSPASSPASS

.

EF7:User opens an Incident in edit mode, navigates to the 'Email' tab, selects 'Detach' to Detach an Email from the IncidentPASSPASSPASSPASSPASS

.

EF8:User changes the 'Limit to' field value and clicks on 'Query'POST-TEST: Verify that just the entered no. of msgs are displayedPASSPASSPASSPASSPASS

.

EF9:User selects 'Load all' checkbox and clicks on 'Query' to view all the associated emailsPASSPASSPASSPASSPASS

.

EF10:User double clicks on the Email to view the EmailPASSPASSPASSPASSPASS

.